To burn monitor use burn program in this directory:

With Prom burner connected via Datamedia aux port,
and set to program 2732 proms(and one in place),
and enabled with SELECT, 5, 0, ENTER, SELECT, D, 1, ENTER, START key sequence.
type    nburn -s 0 4 e FILENAME<cr>   to load prom burner with even bytes
the start prom burner to program EPROM with PROG, START.
repeat the same for odd half using
	nburn -s 0 4 o FILENAME<cr>

Where FILENAME is the monitor image you want, i.e.
		dbmon.x	
